1. Soak the oil: oil spill into the engine
It’s important to act fast when it comes to oil, and the first thing to do is soak up the fresh spill. Use a special cleaning compound to absorb the oil, but if you don’t have any cleaning compound available, use a moisture-wicking substance such as talcum powder, sawdust, or even kitty litter. However, you should only use kitty litter if it is made from an absorbent material, such as newspaper or wood chips. If you don’t have access to any of these components, you can simply use paper towels, just be sure to keep replacing them once they become saturated with oil.
Leave the cleaning compound in the oil for as long as the instructions tell you. If you’ve opted to use something else, we recommend that you let it sit overnight after spreading it over the spill with a brush.
2. Use a broom: oil spill
It’s a good idea to buy a cleaning compound even if you opt for a different substance to initially soak up the oil. While these may work, the cleaning compound is specifically designed to deal with motor oil and will likely do the best job.
Once the cleaning substance of your choice has been left on for a sufficient period of time, it is time to begin the cleaning process. You should use a dustpan and broom to carefully sweep up the compound and oil. As you sweep, continue to spread more compound over the oil spill and allow it to absorb more oil.
3. Prevent oil from solidifying: how to clean up an oil spill
Now that most of the motor oil has been assimilated, you will need to prevent it from becoming solid. If it solidifies, it will be virtually impossible to remove, so anything you can do to emulsify it will help the cleaning process. Motor oil is very similar to many other oils and reacts to warm water and soap. Using dish soap and warm water will prevent the oil from turning solid, so be sure to use it generously and be sure to cover the entire spill.
4. Start scrubbing: oil spill on the floor
While the oil is in a liquid state, you should begin to rub it vigorously with a broom or a bristle broom. It is not recommended that you use a wire brush, this could cause further damage to the concrete. Rubbing will help emulsify the motor oil.
5. Use solvents if you can: how to clean up oil spill
This is the final step and last resort if the oil has not disappeared from performing the other methods. Although solvents are excellent for cleaning oily dirt, it should be noted that they are not suitable for use on asphalt. However, if you are working with a concrete driveway, then using a solvent will be absolutely fine. To care for the oil, you can use a hydrocarbon-based solvent such as paint thinner or kerosene.
Slowly drip the solvent in small amounts onto the residual stain and allow it to absorb the remaining oil. Begin to scrub the solvent with a broom or bristle brush to stimulate the absorbing action. Take special care when handling these chemicals, they are highly flammable and should be used sparingly. Be sure to wear gloves when using solvents of any kind and discard any cloth you use for cleaning. The correct way to do this is by burning them in a drum of oil, this is because simply throwing them into a container could cause spontaneous combustion, and no one wants that to happen in their garage!
Oil spill prevention: how to clean oil from the floor
As in all situations, prevention is better than cure, and there are steps you can take to try to reduce the possibility of spilling motor oil when driving your car or fueling up with a lawn mower. Making use of an oil drain pan will help prevent excess drip when draining the oil from creating a mess. An essential part of the …