One of the most important things you can learn when you first dabble in DIY home improvement is how to find wall studs in your home. Doing so will allow you to hang things like shelves, pictures, and plates without fear of them being crooked or off-center. The simple solution would of course be to get a stud finder, but you won’t always have one on your person at all times. In other cases, some people just can’t afford to buy one. Either way, we’ll teach you how to locate wall posts in your home with these simple tips.
What is a wall stud? what are wall studs
Before we talk about how to search for the poles in your home without the need for a dedicated pole finder, let’s first talk about what poles are and what exactly they are for. A wall stud is a thin, vertical piece of wood, usually made of wood, that is used to provide a frame or “skeleton” to a building. They can be used to support loads or not support any weight, as in the case of partition walls, where the studs are used simply to create a separation between two or more spaces.
Related Post: Best Stallion Finders
Keep an eye out for switches and sockets, stud finders
Now that we’ve talked about what studs are, let’s take a look at how to find them. The first, and possibly the easiest, way to find poles without a pole finder is to look near switches and sockets. Posts can often be found near these landmarks. Most of the standard studs these days go from floor to ceiling. Also, they are commonly used as anchor points for electrical accessories. Just remove the light switch or outlet and then look inside. There is a good chance that you will find the wooden structures you are looking for this way.
Once you’ve found one of your house posts, you’ve found most, if not all, of the others; basically, he is free from home. The posts are generally spaced 16-24 inches apart from each other, so just use your trusty tape measure to identify the rest of them. When you’re ready to attach something to your wall, all you need to do is draw a straight line from the outlet to the mounting point with a pencil.
Use the “shock proof” stud finder
If you have a good ear, another way to find a bolt without a special tool is to check for sound. Play along the entire wall and look for spots where the sound is solid compared to other areas with hollow sounds. If where you’re playing sounds more solid, there’s probably a stud behind that part of the wall. It would be best if you measured 12-, 16-, and 24-inch increments from each corner of the room and hit these points. Doing so will prevent you from wasting time blindly hitting random parts of your wall.
Return to basic
A basic understanding of construction and architecture will also be good to have when looking for wall studs. As we mentioned earlier, these beams are spaced 16-24 inches, which is true for most structures built in the 1920s and after. It would also be nice to know that many studs are attached to both sides of a door or window. However, this is highly dependent on the floor plan of a building, so access to these plans may be necessary.
Find nearby trim, wall stud
Trims like baseboards, as well as shoe and crown moldings are also hot spots for posts. Keep your eyes peeled for obvious spots where the posts were driven. Be on the lookout for dimples, which form when holes are filled in with material like sealant and then painted to get a clean finish. Once you’ve found a stud using this method, all you have to do is measure in the appropriate increments to locate the others.
If you are having difficulty locating studs through your home trim, another way to do this is simply by measuring from the corners. This technique works on most walls. However, it may not work as well in rooms that are not exactly divisible by the usual 16 inches. Doing a “hit test”, as we discussed earlier, would also help.
Look on the bright side, wall studs
If you’re still wondering how to find a stud on the wall, try pulling …