Saltar al contenido

▷▷ 2021 ▷ How to program a keyless remote control in a Mini Cooper ventos.site

3 julio, 2021


Remote keyless entry is standard on most vehicles today. There was a time in the recent past when the key had to be used to open a closed door. But in today’s automotive world, companies can remotely unlock doors if you are locked out. The trunk can be opened to a distance of 15 feet so that the entry and exit of food is much faster. To ensure security, the keyless remote involves several steps for programming. The MINI Cooper has two key models: the two-button and the three-button.

Step 1: how to program mini cooper r56 key

Sit in the driver’s seat of the vehicle. Make sure all doors are closed and both keys are with you.

Step 2: program mini r56 key

Hold down the “Unlock” button on the first key while pressing the center “Lock” button three times.

Step 3: program mini cooper key

Release the “Unlock” button at the same time as the “Lock” button for the third time.

Step 4: open mini key

Repeat steps 2 and 3 for the second key in 30 seconds. Get out of the vehicle and test the remotes.

Three button keys: mini cooper key

Step 1: how to program mini cooper key

Sit in the driver’s seat of the vehicle with all the keys.

Step 2: configure mini one

Insert a key into the ignition switch and turn it to the “2D” position. The dash lights should come on. Remove the key. Do not turn off the ignition.

Step 3: the mini key does not work for me

Press and hold the “Unlock” button on the remote. Press the center “Lock” button three times while holding down the “Unlock” button on the remote control. Release the “Unlock” button at the same time as the “Lock” button after the third press.

Step 4: how to program a mini cooper key

Repeat Step 3 for the second key within 30 seconds of completing the first key programming. Turn off the ignition. Get out of the vehicle and test the remotes.

Tip. control mini cooper

  • Make sure all vehicle keys are programmed at the same time.

Warning

  • Programming one key and not both will disable the second key permanently.



ventos link