Saltar al contenido

▷▷ 2021 ▷ How to program remote controls Chevrolet Malibu

5 julio, 2021

How to program Chevrolet Malibu remotes

by Matthew Fortuna

Davina Calloway / Demand Media

The Chevrolet Malibu is among the many Chevy cars that come with remote and keyless entry. With this technology, you can control your car door locks, your trunk, and your panic alarm from a couple of hundred feet away on the street or in a parking lot. Programming takes just a few minutes from the driver’s seat, and you’ll have the system’s remote and transmitter ready to go right out of the box.

Step 1

Get in your Malibu and close all the doors.

Step 2

b266cfd0 aeb6 4efc a552 bcfcfd6b2318

Insert your key into the ignition. Move the key to “On”, then “Off”. Remove the key from the ignition.

Step 3

27772eb7 79f0 4699 a27d ae2cfdf42e60

Press and hold the “Unlock” tab on the driver’s side door as you insert and remove the key from the ignition three times.

Step 4

8eca3405 2a85 41d1 9933 44fedf099054

Release the “Unlock” tab. Press and hold the “Lock” and “Unlock” buttons on the remote control until the car beeps twice.

ce56b038 34c2 4a86 a18d 8abe9f8452eb

Repeat step 4 for any additional remote controls. Remove your key from the ignition to finish the programming sequence.

More articles

ventos link