Saltar al contenido

▷▷ 2021 ▷ How to remove a Ford Ranger gear lever ventos.site

3 julio, 2021


The gear stick on the Ford Ranger can often get in the way. If you need to work on the transaxle, or some of the components of the manual transmission, you will have to remove the shift lever. As a DIY mechanic, you should always be careful and careful when working on transmission problems. But removing the shifter isn’t as complicated as other transmission jobs, and all you’ll need are some basic tools to get the job done.

Step 1: how to remove gear lever from ford ranger

Park the Ranger on a level surface. Put chocks in front of the front tires and behind the rear tires. Activate the emergency brake and put the Ranger in neutral.

Step 2: how to remove ford ranger gearbox

Remove the mat around the rubber boot of the gear lever. This will reveal the shifter boot retaining bolts. Remove them with a socket wrench. Since you are removing the entire shift lever, it is not necessary to remove the shift boot or the knob on the top of the lever.

Step 3: how to remove the gear lever play

Raise the shift boot. Locate and remove the bolt that secures the shift lever to the Ranger’s transmission. Pull the entire shift lever assembly up and out of the transmission.

Tip, ford ranger gear stick

  • Newer Rangers may also have a trim panel around the shifter assembly. Use a screwdriver to remove the screws holding the panel, and then lift the panel.

Items you will need

  • Wheel chocks
  • Pipe wrench
  • Socket set
  • remove automatic gear lever
  • how to remove the gear lever
  • gear lever ford ranger
  • how to remove the gear lever knob
  • how to remove gear lever



ventos link