Saltar al contenido

▷▷ 2021 ▷ How to set the clock on a Kenwood KDC MP335 car radio ventos.site

5 julio, 2021


by Leonardo R. Grabkowski

The Kenwood KDC-MP335 is an aftermarket car radio that is available for many cars and trucks. The radio unit comes with a built-in digital clock. If your watch shows the wrong time, all you need to do is enter the radio’s clock setting mode to correct the time and set the clock. You will need to set the clock after installing the radio. You may also need to reset it if you have disconnected the battery.

Step 1

Press the down arrow on the control knob located on the far right of the Kenwood car radio. Press repeatedly until the center display shows “CLK ADJ”. Wait a second. The clock display will begin to flash.

Step 2

Press the up arrow on the control panel to increase the hour setting. Press the down button on the control panel to decrease the hour setting.

Step 3

Press the right arrow on the control panel to increase the minutes. Press the left arrow to decrease the minutes.

Press the “Menu” button. This saves the time shift and exits the clock setting mode.

More articles



ventos link