Saltar al contenido

▷▷ 2021 ▷ How to set the time in a Dodge Caliber 2008

5 julio, 2021

by Leonardo R. Grabkowski

Set the time on your 2008 Dodge Caliber if the system clock has reset itself or if you need to adjust for daylight saving time. The clock can be reset only if the battery is replaced or simply disconnected for a period of time. Setting the Caliber’s clock only takes a couple of minutes using the radio control knobs.

Step 1

Turn on the Caliber ignition. Look for the “Time” button on the top panel of the radio. It’s right next to “P-Scan.” Hold down “Time” until the radio display starts to flash.

Step 2

Turn the “Audio” knob on the right side of the radio to set the Caliber clock time. Turning the knob to the right increases the hour; turning it counterclockwise decreases the time.

Step 3

Press the “Audio” knob to save the changes made to the time. This changes the control to the “Minute” setting.

Turn the “Audio” knob to the right or left to set the minutes. Press the “Audio” knob to save time.

More articles

ventos link