Saltar al contenido

▷▷ 2021 ▷ Power window motor specifications

5 julio, 2021

Power Window Motor Specifications |  Still works

by Francine Adams

image by reflections of Furan from

Power window motors are mechanisms installed inside the car door that control the function of the window glass and allow them to go up and down. When the power window motor fails, the power window stops working in whatever position it was in when the power window motor failed. It can be a safety issue if the window is open when the engine fails.

Basic specification

The power window motor has four mounting hole positions. There is a working voltage of 12 volts direct current. The unit is waterproof and ISO 9001 certified.

No load specification

The no-load speed or the speed when no torque is applied to the motor shaft is 95 revolutions per minute (rpm) and the no-load current is less than 1.5 amps.

Job specification

The stall torque or minimum torque required to completely stop the motor shaft rotation, or stop the motor, is less than 8 units or pound-feet (Nm) and the stall current is less than 20 amps.

More articles

ventos link