Saltar al contenido

▷▷ 2021 ▷ specifications and review, service data Toyota 3C-TE ventos.site

4 julio, 2021


Toyota 3C-TE

the Toyota 3C-TE is a 2.2 L (2,184 cc, 133.3 cu in), water-cooled, four-cylinder, four-stroke, turbocharged natural combustion diesel engine from the Toyota C family, manufactured by Toyota Motor Corporation from 1998 to 2004. The 3C-TE diesel engine has a cast iron cylinder block with 86.0 mm (3.39 in) cylinder bores and a 94.0 mm (3.7 in) piston stroke. The compression ratio ratio is 22.6: 1. The Toyota 3C-TE engine has an aluminum cylinder head with a single belt-driven overhead camshaft (SOHC) and 2 valves per cylinder (8 total). The Toyota 3C-TE engine produced from 94.0 PS (69.0 kW; 92.0 HP) at 4400 rpm to 100.0 PS (74.0 kW; 99.0 HP) at 4200 rpm of maximum power output and 206.0 Nm (21 kgm, 151.8 ft · lb) at 2,200 rpm up to 226.0 N · m (23 kg · m, 166.6 ft · lb) at 2,600 rpm of peak torque. The engine code breakdown is as follows:

  • 3 – Third generation engine
  • C – Engine family
  • T – turbocharged
  • me – Electronic Fuel Injection (EFI)

General information: toyota 3c diesel engine specifications

Motor specs
Engine code 3C-TE
Design Straight-4, vertical
Fuel type Diesel
Production 1998-2004
Displacement 2.2 L, 2,184 cc (133.3 cu in)
Injection Electronic fuel injection
Power adder Turbocharger
Horsepower network From 94.0 PS (69.0 kW; 92.0 HP) at 4,400 rpm to 100.0 PS (74.0 kW; 99.0 HP) at 4200 rpm
Torque output From 206.0 Nm (21 kgm, 151.8 ftlb) at 2,200 rpm to 226.0 Nm (23 kgm, 166.6 ftlb) at 2,600 rpm
Order to open fire 1-3-4-2
Dimensions (L x H x W):
Weight

Cylinder block: 3c toyota diesel engine

The cylinder block is made of cast iron. The crankshaft has 8 counterweights and is supported by 5 bearings. A cylinder bore of 86.0 mm (3.39 inches) and a piston stroke of 94.0 mm (3.7 inches) give the 3C engine a total of 2,184 cc of displacement. The compression ratio is 22.6: 1. The pistons are made of high-temperature resistant aluminum alloy. The piston pin is fully floating. Each piston is equipped with two compression rings and a single oil ring. The top ring is made of stainless steel, the second ring is made of cast iron.

Cylindrical block
Cylinder Block Alloy Molten iron
Compression ratio: 22.6: 1
Cylinder bore: 86.0 mm (3.39 inches)
Piston stroke: 94.0 mm (3.7 inches)
Number of piston rings (compression / oil): 2/1
Number of main bearings: 5
Cylinder bore inner diameter: 86.000-86.001 mm (3.3858-3.3859 inches)
Piston skirt diameter 85.883-85.893 mm (3.3812-3.3816 inches)
Piston ring side clearance: Top 0.062-0.111 mm (0.0024-0.0044 inch)
Second 0.070-0.110 mm (0.0028-0.0043 inch)
Petroleum 0.030-0.070 mm (0.0012-0.0028 inch)
Piston Ring End Gap: Top 0.270-0.390 mm (0.0106-0.0154 inch)
Second 0.400-0.450 mm (0.0157-0.0177 inches)
Petroleum 0.200-0.400 mm (0.0079-0.0157 inch)
Piston pin outside diameter 27.000-27.012 mm (1.063-1.0635 inches))
Diameter of main crankshaft journal: 56.985-57.000 mm (2.2435-2.2441 inches)
Crankpin diameter: 50.482-50.500 mm (1.9877-1.9882 inches)

Cylinder head: toyota 3c diesel engine features

Cylinder head
Cylinder head alloy Aluminum
Valve layout: SOHC, belt driven
Valves: 8 (2 valves per cylinder)
Intake Valves Diameter:
Exhaust Valves Diameter:
Intake Valves Length: 105.70 mm (4.1614 inches)
Exhaust valves length: 105.35 mm (4.1476 inches)
Intake Valve Stem Diameter: 7.975-7.990 mm (0.314-0.3146 inches)
Exhaust Valves Stem Diameter: 7.960-7.975 mm (0.3134-0.314 inches)
Valve spring free length: 47.5 mm (1.8701 inches)
Camshaft journal diameter: 27.979-27.995 mm (1.1015-1.1022 inches)
Camshaft Lobe Height (Intake): LiteAce / TontAce: 46.94 mm (1.8480 inches) Others: 47.34 mm (1.8638 inches)
Camshaft Lobe Height (Exhaust): 48.35 mm (1.9035 inches)

Head Tightening Procedure and Torque Specifications: 3c engine meaning

  • Step 1: 44 Nm; 4.5 kg · m; 33 ftlb
  • Step 2: Turn all screws 90 °
  • Step 3: Turn all the screws another 90 °

Maintenance data: toyota 3c engine features

Valve clearance *
Admission valve 0.20-0.30 mm (0.0079-0.0118 inch)
Scape valve 0.25-0.35 mm (0.0098-0.0138 inch)
Compression pressure
Standard 30.0 bar / 250 rpm
Minimum 25.0 bar / 250 rpm
Differential compression limit between cylinders 5.0 bar / 250 rpm
System of…



ventos link