The cigarette lighter fuse was rarely blown in vehicles before the introduction of wearable technology. With more modern vehicles, the camera that once housed the cigarette lighter now has a phone or computer adapter attached. Sometimes a blown fuse is caused by a coin that has fallen into the lighter chamber. In other cases, the faulty fuse could be attributed to a short in the wiring of a plug-in adapter. Whatever the reason for the short, you can replace the fuse in your 1998 Toyota Camry right in your home garage.
Step 1: cigarette lighter fuse
Raise the hood and keep it open. Disconnect the negative battery cable with a socket wrench. Open the driver’s door on your 1998 Camry.
Step 2: toyota camry 98 fuse diagram
Make sure the ignition is off and the key is removed. Locate the fuse box on the driver’s side of your Camry. It sits just below the dash and has a square deck.
Step 3: 1998 toyota camry fuse box
Remove the fuse box cover by popping the tab at the top.
Step 4: cigarette lighter fuse
Identify the cigarette lighter fuse. The back or top of the fuse box cover has a list of fuses, which is basically a map of the fuse group. Look for a 15 amp fuse with “CIG / RADIO” above it.
Locate the fuse in your Camry’s fuse box that corresponds to the list. Each fuse has the same description, only smaller. The owner’s manual has an enlarged version of the group, listed below the fuses. Use a pair of needle nose pliers to remove and replace the fuse.
Items you will need; cigarette lighter fuse name
- Socket wrench set
- Owner’s manual
- where is the cigarette lighter fuse
- cigarette lighter fuse name